Breakout Box for IN/OUT Connector:
• BOB-1, includes cable
Screw Terminal Connectors that mate directly to the IN/OUT connector on the front panel of the drive:
• Phoenix Contact P/N 2761622.
This connector is not available from Applied Motion. You must purchase it from
a Phoenix distributor.
Mating Cable for IN/OUT connector with "flying leads”
• Black Box P/N: BC00702. This cable is not available from Applied Motion.
You must purchase it from Black Box. Useful for custom wired applications. This shielded cable has a
DB-25 connector on each end,
so you'll need to cut off the end that doesn't connect to the drive.
It’ll be easier to wire if you get the cable color chart from Black Box’s web site.
Protects drive and power supply from energy transferred from the load to the drive and power supply during deceleration. Only one clamp is needed for each power supply.
Operator Terminal (-Si drives only)
Applied Motion Products MMI-01 or MMI-02 (backlit) interfaces seamlessly to the Si Programmer software to allow an operator to enter move speeds and distances, and loop counts. Also supports menu selection, variable/status display and jogging.
